Jenn-Air KitchenAid KBSD708M S00 Series Technical Manual page 17

Measured Fill
Calibrate Measured Fill
Household water pressure may affect the accuracy of the Measured Fill feature. For optimum performance of your water dispenser,
you must first calibrate Measured Fill.
Start Calibration Mode
1. Press and hold the Measured Fill button for 3 seconds to enter Calibration Mode. The button will display along with the 0.2 L or 8 oz
default settings.
2. Pressing the water pad will dispense water (e.g. into a measuring cup) until the desired amount is dispensed. Releasing the water
pad will stop water dispensing.
Save and Exiting Calibration
1. If water was dispensed, pressing the Measured Fill button will save the amount dispensed, a tone will play and the calibration
amount display will blink twice.
2. If no water was dispensed, Pressing the Measured Fill button will exit Calibration mode without saving the calibration amount.
NOTE: The amount of water you select will be dispensed. Be sure that the container is empty and can hold the entire volume. If ice is in
the container, you may need to adjust your selection.
IMPORTANT: Low water pressure may affect the accuracy of this feature.
1. Press MEASURED FILL to turn the feature on. When the feature is on, the Measured Fill screen appears on the display.
2. To dispense water, press a sturdy glass against the water dispenser pad or place the glass below the water dispenser and press the
MEASURED FILL button. Hold the glass close to the water dispenser spout to ensure that the water dispenses into the glass.
3. The Measured fill button can be pressed to loop the preset amounts. Each press advances the preset amount until the end of the
options are reached. Example - 8 oz to 16 oz to
24 oz, END (0.2L to 0.5L to 1.0L, END).
NOTE:
n The dispenser will automatically turn off Measured Fill after 1 minute of inactivity. When Measured Fill is turned off, any changes
you have made will be lost and all defaults will be restored.
n Most coffee cups are 4-6 oz (118-117 ml) and are not the same size as an 8 oz (237 ml) measuring cup. You may need to adjust the
volume to avoid overfilling coffee cups.
n While dispensing water, the digital display will count down how much water remains to be dispensed, according to the volume you
selected. The flow of water will automatically stop once the desired volume has been dispensed.
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
GENERAL INFORMATION (CONT.)
1-13
n