Table of Contents
Advertisement
7
5
1
3
Non-Dispenser Control Panel
IMPORTANT:
n The refrigerator control adjusts the refrigerator compartment
temperature. The freezer control adjusts the freezer
compartment temperature.
n Wait 24 hours after you turn on the refrigerator before you
put food into it. If you add food before the refrigerator has
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a
lower (colder) setting will not cool the compartments any
faster.
n If the temperature is too warm or too cold in the refrigerator
or freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
n The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
n The actual temperature may differ from the display when a
door is open for an extended period of time.
NOTE: The factory recommended set points are 0°F (-18°C) for
the freezer and 37°F (3°C) for the refrigerator.
1. Turning Refrigerator ON and Viewing
Set Points
Your refrigerator and freezer will not cool when cooling is turned
OFF. Follow the directions specific to your model.
Turn ON - Dispenser Model
n Press and hold Max Freeze and Max Cool buttons at the same
time for 3 seconds.
n Cooling OFF button blinks twice and remains ON.
Turn ON - Non-Dispensing Model
n Press and hold Cooling OFF button for 3 seconds.
n Cooling OFF button blinks twice and remains ON.
NOTE: The Cooling ON/OFF touch pad on the control panel shuts
down refrigerator functions such as cooling, lighting, fans, and
compressors. To turn the power OFF completely, use the power
ON/OFF switch located behind the top grille.
Using The Controls
5
2
3
6
4
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
GENERAL INFORMATION (CONT.)
Dispenser Control Panel
2. Setting the Temperature F°/C°
Dispensing Models
Press and hold the Max Cool and Crisper buttons at the same
time for 3 seconds to change between Celsius and Fahrenheit.
When activated, the selected temperature option displays. When
deactivated, the display is OFF.
Non-Dispensing Models
Press F°-C° button to change between Celsius and Fahrenheit.
When activated, the selected temperature option displays. When
deactivated, the LED is OFF.
3. Adjusting Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
n Press the refrigerator or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature is reached.
n Press the Set to Recommended touch pad to reset the set
points to the factory recommended temperatures.
NOTE: The set point range for the freezer is -8°F (-22°C) to
5°F (-15°C). The set point range for the refrigerator is 33°F
(1°C ) to 43°F (6°C).
Condition/Reason
REFRIGERATOR too cold
REFRIGERATOR too warm
FREEZER too cold
FREEZER too warm/too little
ice
4. Water Filter Indicator and Reset
The water filter indicator, located on the control panel, will help
you know when to change the water filter.
It is recommended that you replace the filter when "Replace
Filter" is displayed or when water flow to your water dispenser
and/or ice maker decreases noticeably.
After changing the water filter, press and hold FILTER RESET for 3
seconds until the "Replace Filter" indicator light disappears.
Temperature Adjustment
REFRIGERATOR Control 1°C
or 2°F higher
REFRIGERATOR Control 1°C
or 2°F lower
FREEZER Control 1°C or 2°F
higher
FREEZER Control 1°C or 2°F
lower
1-9
n
Advertisement
Table of Contents
