Jenn-Air KitchenAid KBSD708M S00 Series Technical Manual page 24

COMPONENT ACCESS (CONT.)
Removing the Light Switches
1. Complete the steps 1-3
Decorative Cover.
2. Light switches are located on the left and right hinge at the
top of the doors.
3. Remove two (2) phillips head mounting screws and remove
the switch mounting bracket.
4. Remove two (2) 1/4" hex head screws from the front of the
mounting bracket to release the switch cover.
4-4 JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
n
from section Removing the Front
5. Disconnect the two (2) or three (3) wires (depends on
model).
6. The switch is mounted in place by compression tabs, squeeze
the tabs and push the switch out through the front of the
bracket.