To Handle The Indoor Unit - Daikin ETSHB16P30EF Installer's Reference Manual

4 | About the box

4.3.3 To handle the indoor unit

Installer reference guide
26
p Top cover screws
q General safety precautions
r WLAN cartridge
s Indoor unit installation manual
t Operation manual
Use the handles at the back and at the bottom to carry the unit.
Use the handles at the back and at the front to carry the unit.
NOTICE
The indoor unit is top-heavy as long as the storage tank is empty. Secure the unit
accordingly and only transport by using the handles.
If optional Backup Heater (EKECBU*) is installed, see the installation manual of the
Backup Heater.
a Screw plug
b Assembly wrench
c Handle
1 Open the screw plugs on the front and back of the tank.
2 Attach the handles horizontally and turn by 360°.
3 Use the handles to carry the unit.
4 After carrying the unit remove the handles, add the screw plugs again and
insert the thread covers on the plugs.
EPRA14~18DAV3+W1 + ETSH/X(B)16P30+50EF
Daikin Altherma 3 H HT ECH₂O
4P679467-1 – 2022.02