9
|
Electrical installation
9.3.14 To connect the WLAN cartridge (delivered as accessory)
9.3.15 To connect the solar input
Installer reference guide
140
[D] Wireless gateway
1 Insert the WLAN cartridge into the cartridge slot on the user interface of the
indoor unit.
WARNING
In order to keep IPX3, the rubber part must be correctly fixed after WLAN
installation.
Wires: 0.5 mm²
Solar input contact: 5 V DC (voltage supplied by PCB)
—
1 Open the following (see
1 User interface panel
2 Switch box
3 Switch box cover
4 Top cover
2 Connect the solar input cable as shown in the illustration below.
"7.2.5 To open the indoor
4
unit" [
73]):
EPRA14~18DAV3+W1 + ETSH/X(B)16P30+50EF
Daikin Altherma 3 H HT ECH₂O
4P679467-1 – 2022.02
4
3
2
1