To Remove The Accessories From The Indoor Unit; To Handle The Indoor Unit - Daikin ETSX16P30EF Installer's Reference Manual

4.2.2 To remove the accessories from the indoor unit

4.2.3 To handle the indoor unit

EPRA14~18DAV3+W1 + ETSH/X(B)16P30+50EF
Daikin Altherma 3 H HT ECH₂O
4P679467-1A – 2022.07
a Handles (only required for transport)
b Thread cover
c Spillover connector
d Assembly wrench
e Shut-off valve
f Flat gasket
g O‑ring
h Securing clip
i Venting hose
j Drain pan hose
k Drain pan hose clamp
l Cable fixation for strain relief
m Cable tie
n Switch box metal insert
o Screw for switch box metal insert
p Top cover screws
q General safety precautions
r WLAN cartridge
s Indoor unit installation manual
t Operation manual
Use the handles at the back and at the front to carry the unit.
NOTICE
The indoor unit is top-heavy as long as the storage tank is empty. Secure the unit
accordingly and only transport by using the handles.
If optional Backup Heater (EKECBU*) is installed, see the installation manual of the
Backup Heater.
a b c d e f
2× 3× 1× 1× 2× 2×
h i j k l m
1× 1× 1× 1× 1 × 7 20×
n o p q
1× 1× 2× 1×
r s t
1× 1× 1×
4 About the box
|
g
1×
Installer reference guide
25