Display Of The Inputs / Outputs Status; Versions Of Software And Hardware - Carrier 50FC User Manual

9 - DISPLAY OF THE INPUTS / OUTPUTS STATUS

All variables which are controlled by the system are displayed in
this group of screens, including the status of the digital inputs, the
digital outputs and the analogue outputs, both the main board and
the installed expansion cards.
This group of screens is accessed from the MAIN MENU, in E.
INPUTS/OUTPUTS.
● Values measured by the sensors: screen I01, I01a, I01b, I02, I03,
I03a, I03b, I03c, I04a, I04b, I05a, I05c, I05e, I06a, I06b, I12d.
S1 probe
Return temperature
probe
S2 probe
Outdoor temperature
probe
● Electronic expansion valve(s) reading: screens I06a1, I06b1,
I06c1, I06e, I06f, I06g.
EEV
Opening:
Status:
Protection:
SH: 000.0K
● Cumulated operating hours by the unit and each compressor:
screens I07, I07a.
Operating hours
Unit:
Compress. 1-C1:00000
Compress. 2-C1:00000
● Digital inputs status: screen I08 (main board), screen I08b
(expansion card addr.8), screen I08c (expansion card addr.9).
Digital input
status (1...10):
C C C C C C C C C C
C: Closed contact
O: Open contact

10 - VERSIONS OF SOFTWARE AND HARDWARE

In this group of screens O. CRTL_ID from the MAIN MENU, the
Software version installed on the control board is provided.
SOFTWARE
"50FC" Contro1
Version:
Date:
SO: 5.1.6
Boot: 5.1.6
I01
16.0ßC
20.0ßC
I06a
0000stp
000.0%
---
None
I07
00000
I08
V01
16.2.0
09/05/23
● Digital outputs status: screens I09, I09a, I10, I11 (main board),
I10b (expansion card addr.8), I10c (expansion card addr.9).
Compressor 1 - C1
Compressor 2 - C1
Compressor 1 - C2
Compressor 2 - C2
● Analogue outputs status: screens I12, I12a (main board), screen
I12b (expansion card addr.8), screen I12c (expansion card addr.9).
Outdoor damper:
Heat valve:
000%: opening percentage
● Cooling recovery circuit reading (optional): screens I06cr1, I06cr2,
I06fr, I06er, I05ar, I08cr, I10cr.
Active recovey
Cooling capacity: 000%
Pres.HP: 000.0bar
HP. Temp: 000.0ßC
suct. T: 000.0ßC
evap P: 000.0barg
evap T: 000.0ßC
● Optional element readings: energy meter: screens I15, I16, I17,
I18; and R-410A leak detector: screen I18a.
Energy meter
Voltages
V L1-L2:
V L2-L3:
V L3-L1:
V L1:
V L2:
V L3:
● Calculation of the cooling and heating capacities (optional):
screens I18b, I18c, I18d, I18e.
Refriger. power:
Input enthalpy
value: 00.0 kcal/kg
Input humidity
value: 50.0 %
Input temperature
value: 000.0C
The second screen of this menu shows the main features of the
hardware.
HARDWARE
Board type:
Board size: Medium
Main cycle: 247ms
4.0 cycles/s
I09
OFF
OFF
OFF
OFF
I12
025%
000%
I06cr1
I15
000.0 V
000.0 V
000.0 V
000.0 V
000.0 V
000.0 V
I18b
V02
uPC3
21