Rear Rod Seal - Graco FUSION 248597 Instructions-Parts List Manual

Rear Rod Seal

1.
Follow Pressure Relief Procedure, page 18.
2.
Flush Gun, page 23.
3.
Remove fluid manifold (G). Leave air connected.
G
4.
Disassemble Front End, page 30.
5.
Remove rear rod seal nut (23) with nut driver (53).
53
6.
Push out rear seal (46) with screwdriver (54).
46
36
7.
8.
9.
TI4972a
23
TI3869a
54
TI3872a
Reassemble new rear seal (46) in rear rod seal nut
(23). Lubricate threads and install in fluid housing
(7) with nut driver.
Reassemble Front End, page 32.
Attach fluid manifold. Connect air. Return gun to
service.
Repair
310648E