Piston Safety Lock; Loss Of Air Pressure - Graco FUSION 248597 Instructions-Parts List Manual

Piston Safety Lock

Engage piston safety lock whenever you stop spray-
ing, to avoid accidental triggering.
WARNING
Read warnings, page 4.
To engage piston safety lock: push knob in and turn
clockwise. When engaged, piston safety lock allows
some purge rod movement but shuts off fluid flow and
gun cannot spray.
To disengage piston safety lock: push knob in and
turn counterclockwise until it pops out.
8

Loss of Air Pressure

In event of loss of air pressure while gun is triggered,
gun will continue to spray. To shut off gun, do one of the
following:
• Push hard or hit end of safety lock, to engage piston
safety lock.
• Close fluid valves A and B.
TI3850a
TI3849a
Piston Safety Lock
TI5003a
TI4967a
310648E