Adjust Rear Rod Seal - Graco A Series Instructions - Parts Manual

Adjust Rear Rod Seal

1.
Follow Pressure Relief Procedure, page 17.
2.
Flush Gun, page 21.
3.
Remove fluid manifold (G). Leave air connected.
G
4.
Disassemble Front End, page 33.
5.
Assemble fluid housing (7) backwards onto purge
rod (31). Adjust rear rod seal nut (23) with nut
driver until drag is felt when sliding on rod.
7
23
309856A
TI3852a
31
TI3831a
6.
Remove fluid housing (7) from rod (31).
7.
Reassemble Front End, page 34.
8.
Adjust Purge Rod, page 14.
9.
Attach fluid manifold. Return gun to service.
Maintenance
27