Graco FUSION 248597 Instructions-Parts List Manual page 19

6.
Engage piston safety lock (L), page 8.
L
WARNING
If fluid in the hose and proportioner is still under pres-
sure, follow the Pressure Relief Procedure in the pro-
portioner manual.
To relieve pressure in the hose after the gun is
removed, place the fluid manifold over containers, fac-
ing away from you. Very carefully open the fluid valves.
Under high pressure, fluid will spray sideways from the
fluid ports.
7.
Flush static mixer and tip, see Flushing with Sol-
vent Purge Assembly, page 16.
8.
Shut off air to solvent supply. Open solvent purge
knob (V) and relieve pressure in the solvent line.
V
310648E
TI3850a
TI2484A
TI5110a
Pressure Relief Procedure
19