Graco FUSION 248597 Instructions-Parts List Manual page 35

CAUTION
Do not overtighten mix module nut (25). Overtighten-
ing can deform impingement holes and cause slow
gun actuation.
8.
Lubricate all threads and reassemble mix module
nut (25) fingertight. Tighten additional 1/12 turn
with wrench. Install front seal (46) on rod (31).
25
46
310648E
9.
Reinstall solvent purge assembly (28). Lubricate
all threads. Install static mixer (40) and RAC tip
and guard (9, 63). Tighten with wrench.
9, 63
10.
1/12 Turn
TI4986a
28
40
Attach fluid manifold. Return gun to service.
Repair
TI5032a
35