Figure 100. Reinstalling the computer cover (for M700z)
Figure 101. Reinstalling the computer cover (for M800z)
4. Install the computer stand. See "Replacing the computer stand" on page 96.
5. Place the computer in an upright position.
6. If a locking device is available, use it to lock the computer. See "Locking the computer" on page 65.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 27.
8. Update your configuration. See "Using the Setup Utility program" on page 71.
9. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping the computer current" on page 62.
.
Chapter 9
Installing or replacing hardware
143