8. Remove the two screws
holder from the optical drive.
Figure 44. Removing the optical drive holder
9. Install the two screws to secure the optical drive holder to the new optical drive.
10. Slide the new optical drive into the drive bay from the side of the computer until the screw hole in the
optical drive holder aligns with the corresponding hole in the chassis.
Figure 45. Installing the optical drive (for M700z)
Figure 46. Installing the optical drive (for M800z)
11. Install the screw to secure the optical drive holder to the chassis.
1
that secure the optical drive holder to the optical drive, and then remove the
.
Chapter 9
Installing or replacing hardware
111