Table of Contents
Advertisement
24. Pivot the retaining clips
Figure 98. Removing the LCD panel from the chassis (for M700z)
Figure 99. Removing the LCD panel from the chassis (for M800z)
25. Disconnect the LCD panel power cable and signal cable from the failing LCD panel.
26. Connect the LCD panel power cable and signal cable to the new LCD panel.
27. Align the chassis with the new LCD panel. Then, press the chassis into the LCD panel until it snaps
into position.
1
outward as shown one by one to remove the chassis from the LCD panel.
.
Chapter 9
Installing or replacing hardware
141
Advertisement
Table of Contents
