Figure 62. Installing the control-button board (for M700z)
Figure 63. Installing the control-button board (for M800z)
11. Connect the control-button board cable to the control-button board.
12. If you have removed the serial connector module, reinstall it. See "Replacing the serial connector
module" on page 127.
13. Install the system-board shield. See "Replacing the system-board shield" on page 102.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 142.
120
ThinkCentre M700z and M800z Hardware Maintenance Manual