Table of Contents
Advertisement
3-5. CLEANING PROCEDURES
203
1. Move the Power Switch to the OFF position.
2. Disconnect electrical supply to the unit.
To avoid burns, allow the unit to cool before cleaning.
3. Remove the wire baskets from the drawers.
4. Take the baskets to a sink and thoroughly clean.
Step 3
5. Remove drawers by pulling them out and tilting them up.
6. Clean the drawers with a cloth and soapy water.
7. Remove the drip tray from the bottom of the cabinet and clean
it at a sink.
8. Clean the cabinet interior with a cloth and soapy water.
Step 5
Do not use steel wool, other abrasive cleaners or
cleaners/sanitizers containing chlorine, bromine, iodine or
ammonia chemicals, as these will deteriorate the stainless
steel material and shorten the life of the unit.
DO NOT use a water jet (pressure sprayer) to clean the
unit, or component failure could result.
9. Wipe the cabinet exterior with a damp cloth. Avoid getting
water in the area of the control panel.
Step 7
10. Replace the drip tray, drawers, and wire baskets.
11. If the unit is to remain turned off, leave the top drawer open two
or three inches to help dry the interior.
Model HCH-930/932
3-5
Advertisement
Table of Contents
