Cleaning Procedures - Henny Penny Wendy's MPC-21L Operator's Manual

3-4.
CLEANING
PROCEDURES
Sept. 2013
1.
Turn all controls to the OFF position.
2.
Disconnect the electrical supply to the cabinet.
To avoid burns, allow the unit to cool before
3.
Remove all pans from the cabinet and take the pans to a sink
and clean them thoroughly.
4.
Clean inside cabinet with a soft cloth, soap, and water. DO
NOT use excessive amounts of water.
5.
Wipe the control panel with a damp cloth. Do not splash water
around the controls.
6.
Clean the exterior of the cabinet with a damp cloth.
Do not use steel wool, scrub pads, other abrasive cleaners
or cleaners/sanitizer containing chlorine, bromine, iodine or
ammonia chemicals, as these will deteriorate the stainless steel
material and shorten the life of the unit.
Do not use a water jet (or any kind of pressure sprayer) to
clean the unit, or component failure could result.
8
cleaning.