Operating With Product; Cleaning - Henny Penny MP-941 Operator's Manual

3-3. START-UP (Continued)
3-4. OPERATING WITH
PRODUCT

3-5. CLEANING

203
1. Turn the POWER switch to the ON position.
2. The display will show the time of day or "ON".
Press and hold the appropriate drawer button to
view the actual temperature of the drawer.
3. When the temperature LED illuminates, the setpoint
temperature has been reached and product can now
be loaded into the drawer.
1. Place the hot product inside one of the drawers.
2. Serve the product first that has been in the cabinet
the longest.
3. Open the drawers only as necessary to load and
serve the product.
1. Move the POWER switch to the OFF position.
2. Disconnect the electrical supply to the unit.
To avoid burns, allow the unit to cool before
cleaning by opening all the drawers fully for
approximately 20 minutes.
3. Remove the drawers by pulling straight out and
tilting up.
Step 3
4. Clean drawers with a cloth and soapy water.
Model MP-941/942/943/944
3-3