Daikin Altherma EHVH08SU18CB6W Installer's Reference Manual page 103

Field settings table
Breadcrumb Field code Setting name
A.8 [9-0D] Pump speed limitation
A.8 [9-0E] --
A.8 [A-00] --
A.8 [A-01] --
A.8 [A-02] --
A.8 [A-03] --
A.8 [A-04] --
A.8 [B-00] --
A.8 [B-01] --
A.8 [B-02] --
A.8 [B-03] --
A.8 [B-04] --
A.8 [C-00] Domestic heating water priority.
A.8 [C-01] --
A.8 [C-02] Is an external backup heat source connected?
A.8 [C-03] Bivalent activation temperature.
A.8 [C-04] Bivalent hysteresis temperature.
A.8 [C-05] What is the thermo request contact type for the main zone?
A.8 [C-06] What is the thermo request contact type for the add. zone?
A.8 [C-07] What is the unit control method in space operation?
A.8 [C-08] Which type of external sensor is installed?
A.8 [C-09] What is the required alarm output contact type?
A.8 [C-0A] --
A.8 [C-0C] High electricity price decimal (Do not use)
A.8 [C-0D] Medium electricity price decimal (Do not use)
A.8 [C-0E] Low electricity price decimal (Do not use)
A.8 [D-00] Which heaters are permitted if prefer. kWh rate PS is cut?
A.8 [D-01] Forced off contact type
A.8 [D-02] Which type of DHW pump is installed?
A.8 [D-03] Leaving water temperature compensation around 0°C.
A.8 [D-04] Is a demand PCB connected?
A.8 [D-05] Is the pump allowed to run if prefer. kWh rate PS is cut?
A.8 [D-07] Is a solar kit connected?
A.8 [D-08] Is an external kWh meter used for power measurement?
A.8 [D-09] Is an external kWh meter used for power measurement?
A.8 [D-0A] --
A.8 [D-0B] --
A.8 [D-0C] What is the high electricity price (Do not use)
A.8 [D-0D] What is the medium electricity price (Do not use)
A.8 [D-0E] What is the low electricity price (Do not use)
A.8 [E-00] Which type of unit is installed?
A.8 [E-01] Which type of compressor is installed?
A.8 [E-02] What is the indoor unit software type?
A.8 [E-03] What is the number of backup heater steps?
(*1) *04/08*_(*2) *11/16*
Range, step
Default value
R/W 0~8, step:1
0 : 100%
1~4 : 80~50%
5~8 : 80~50%
6
6
0
0 (*1)
3 (*2)
0 (*1)
1 (*2)
0
0
0
0
0
0
0
R/W 0: Solar priority
1: Heat pump priority
0
R/W 0: No
1: Bivalent
2: -
3: -
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step: 1°C
3°C
R/W 1: Thermo ON/OFF
2: C/H request
R/W 0: -
1: Thermo ON/OFF
2: C/H request
R/W 0: LWT control
1: Ext RT control
2: RT control
R/W
0: No
1: Outdoor sensor
2: Room sensor
R/W
0: Normally open
1: Normally closed
0
R/W 0~7
0
R/W 0~7
0
R/W 0~7
0
R/W
0: None
1: BSH only
2: BUH only
3: All heaters
R/W
0: No
1: Open tariff
2: Closed tariff
3: Thermostat
R/W
0: No
1: Secondary rtrn
2: Disinf. Shunt
3: Circul. Pump
4: CP & disinf. Sh
R/W
0: Disabled
1: Enabled, shift 2°C (from -2 to 2°C)
2: Enabled, shift 4°C (from -2 to 2°C)
3: Enabled, shift 2°C (from -4 to 4°C)
4: Enabled, shift 4°C (from -4 to 4°C)
R/W 0: No
1: Pwr consmp ctrl
R/W 0: Forced off
1: As normal
R/W
0: No
1: Yes
R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
0
2
R/W 0~49
0
R/W 0~49
0
R/W 0~49
0
R/O
0~5
0: LT split
R/O 0: 8
1: 16
R/O 0~1
1: Type 2
R/O 0: No BUH
1: 1 step
2: 2 steps
7/8
Installer setting at variance with
default value
Date Value
4P449983-1 - 2016.06