Making The Settings For The Mixer [Mixer]; Adjusting The Relative Volume Of Pads - Roland V-Drums TD-8 Owner's Manual

Chapter 3 Making the Settings for the Studio and Mixer
Making the Settings for the
Mixer [MIXER]
Use a 12-channel mixing console to put the finishing touches
on the sound.
Press [MIXER] to display the setting screen.
fig.04-007
Screen Summary
The following, from left to right, is indicated on the screen.
Screen Trigger Input
K
K
S
1
2
3
H
C
C
R
A
A
Basic Operation
1. Press [MIXER].
[MIXER] lights, and the "MIXER" screen appears.
2. Press CURSOR [
] or [
parameters to be set.
The setting screen appears.
3. In each screen, when a pad for which you are making
settings is struck, the cursor moves to the corresponding
pad's slider or knob.
• The rim cannot be selected for TRIGGER INPUT 1 (KICK 1),
2 (KICK 2), 11 (AUX 1), or 12 (AUX 2).
• TRIGGER INPUT 2 (KICK2) and 12 (AUX2) can be used
only when two pads are connected to TRIGGER INPUT 1/2
(KICK1/2) or 11/12 (AUX2), respectively (p. 27).
92
1 (KICK1)
2 (KICK2)
3 (SNARE)
4 (TOM1)
5 (TOM2)
6 (TOM3)
7 (HI-HAT)
8 (CRASH1)
9 (CRASH2)
10 (RIDE)
11 (AUX1)
12 (AUX2)
] to move the cursor to the
You can jump directly to the next screen by pressing [F1
( MENU)].
1. Press [F1 (
MENU)].
A pop-up menu appears.
2. Press CURSOR [
be displayed.
3. Press [F1] to confirm the selection.
AMB (AMBIENCE)
Jumps you to the Ambience send level settings
screen (p. 89).
OUT (OUTPUT)
Jumps you to the Output settings screen (p. 137).
Adjusting the Relative Volume of
Pads
Here's how to set the volume individually for each of the
pads.
fig.04-008
1. Press [MIXER].
[MIXER] lights, and the "MIXER" screen appears.
2. Press CURSOR [
] to move the cursor to "LEVEL."
3. Strike a pad.
The cursor moves to the slider for the pad that was
struck.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5. Press [KIT].
The "DRUM KIT" screen appears.
LEVEL: 0–127
Set the volume of the pedal hi-hat with "Adjusting the
Pedal Hi-Hat Volume (PEDAL HI-HAT VOLUME)" (p.
81).
] or [ ] to select the screen to