Adjusting The Volume, Ambience Send Level, Pan (Placement), And Bend Range; Adjusting The Overall Ambience Of The Backing Parts; (Group Ambience Send Level) - Roland V-Drums TD-8 Owner's Manual

3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the instrument number.
4. Press CURSOR [
] to move the cursor to instrument
name.
5. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the instrument name.
You can confirm the sound of the selected instrument by
pressing [PREVIEW].
6. Press [PATTERN].
The "PATTERN" screen appears.
• To see which instruments can be selected here, refer to
"Backing Instrument List" (p. 186).
• For more on the percussion part settings, refer to "Making the
Settings for the Percussion Set" (p. 104).
Instrument Numbers
You can change the tone by changing the instrument
number. Selecting different variations within each
instrument number changes the instrument name,
with a different tone being selected.
Instrument numbers correspond to the program
numbers (1–128).
Instrument Names
You can select all internal tones in sequence,
including variation tones.
Variation Tones
These are slightly varied tone types found in an
instrument number. The number of variation tones
varies with the instrument number.
Chapter 5 Playing Along with Patterns
Adjusting the Volume, Ambience
Send Level, Pan (Placement), and
Bend Range
To make the settings for percussion part, refer to "Making the
Settings for the Percussion Set" (p. 104).
fig.06-015
1. Follow the procedures described in "Choosing a Part" (p.
102) to select the part to be changed.
2. Press [F2 (PAGE2)].
3. Press CURSOR [
] or [
parameter to be set.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5. Press [PATTERN].
The "PATTERN" screen appears.
LEVEL: 0–127
This adjusts the volume.
AMB LEVEL: 0–127
This adjusts the Ambience send level.
PAN: L15–CTR (Center)–R15
This adjusts the left-right placement of the sound. "L15"
is far left, "CTR" is center, and "R15" is far right.
BEND RANGE: 0–+24
This adjusts the amount of change in pitch with pitch
bend at the maximum level. You can adjust this from 0 to
+24 (up two octaves).
Adjusting the Overall Ambience
of the Backing Parts
(AMBIENCE GROUP SEND LEVEL)
This adjusts the overall Ambience send level for the backing
part instruments (backing instruments).
First press [KIT], then [F2 (STUDIO)], then [F2 (AMBSND)],
then [F1 (GRPSND)], and then [F3 (B INST)] to call up the
settings screen.
For more detailed instructions for making these settings, refer
to "Adjusting the Ambience Level for Each Individual Part
Group (AMBIENCE GROUP SEND LEVEL)" (p. 90).
] to move the cursor to the
103