Operating Guide (Panel Descriptions); Selecting A Kit; Making Overall Settings; Turning The Power On/Off - Roland TD-17 Owner's Manual

Operating Guide (Panel Descriptions)

Selecting a Kit

This unit lets you enjoy performing with a variety of sounds.
1.
Press the [DRUM KIT] button.
2.
Turn the dial to select a kit.
Reference
For details on the kits, refer to "Data List" (PDF).

Making Overall Settings

Here's how to make overall settings for the entire unit.
1.
Press the [SETUP] button.
2.
Use the dial to select a menu item, and press the [ENTER]
button.
3.
Use the function buttons, [ ] [ ] buttons, or dial to edit
the value.

Turning the Power On/Off

Turns the power on/off.

Viewing the Display

The kit name, tempo, and currently available functions are
shown here.
Screen at startup (KIT screen)
The trigger meter shows the level of the trigger signal that's received
when you strike a pad.
Using cross stick technique
Each time you press the [F1] (XSTICK) button, you
switch between sounding or not sounding the
snare pad's cross stick sound (p. 7).
Adjusting various volumes
1.
Press the [F2] (MIX VOL) button.
2.
Use the [ ] [ ] buttons and the dial to adjust the value.
Input volume of the device connected
Audio In
to the MIX IN jack and Bluetooth
Click Volume of the click
Song Volume of the song
Guide Track Volume of the guide track (p. 13)
8
20
page
4
page
Tempo: when click is on
Speed:
when a song is playing back
User sample icon:
When using a user sample (p. 15)
Kit number and name
Kits and Instruments
On this unit, the sound
you hear when you strike
each pad is called an
"instrument. " A "kit" is a set
of sounds (instruments)
assigned to the pads.
* The illustration shows the TD-17.

Confirming an Operation / Editing a Value

Confirm an operation /
Proceed to the next screen
Cancel an operation / Return
to the previous screen
Move the cursor up/down
Edit the value
Specify a function shown in
the bottom of the display
Stop all currently-heard
sound (All Sound Off)
Kit
Instrument
Press the [ENTER]
button.
Press the [EXIT] button.
Press the [ ] [ ] buttons.
Turn the dial.
If you hold down the
[ENTER] button and
turn the dial, the value
changes rapidly.
Press a function button.
[F1] [F2] [F3]
Hold down the [ENTER]
button and press the
[EXIT] button.
You can stop (mute) all
currently-playing sound.