Choosing A Percussion Instrument; Making The Settings For Each Instrument - Roland V-Drums TD-8 Owner's Manual

3. Press [F3 (COPY)].
The "INST COPY" screen appears.
This changes to [F3 (EDIT)] when a User percussion set is
selected in Step 1. In this case, reselect a Preset percussion set.
4. Press CURSOR [
] to move the cursor to the copy-
source percussion set.
5. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-source percussion set.
6. Press CURSOR [
] to move the cursor to the copy-
destination percussion set.
7. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-destination percussion set.
8. Press [F3 (COPY)].
The confirmation screen appears.
fig.06-019
9. Press [F3 (EXEC)].
Press [F1 (CANCEL)] to cancel the operation.
10. When copying is finished, press [PATTERN].
The "PATTERN" screen appears.
Choosing a Percussion
Instrument
fig.06-020
Indicated from left to right are the note number, note name,
and instrument name.
• When a Preset percussion set is selected, only the Instrument
List is displayed. If changing any instrument, first copy the set
to a User percussion set. You can then make the change by
selecting a User percussion set (p. 104).
• Making changes to a User percussion set that is being used in
a pattern may result in changes in the way the pattern is
played.
1. Follow the procedures described in "Choosing a Part" to
select the percussion part.
Chapter 5 Playing Along with Patterns
2. Press [F3 (INST)].
The "PERC INST" screen appears.
3. Press CURSOR [
] or [
note to be set.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose instrument.
5. Press [PATTERN].
The "PATTERN" screen appears.
You can confirm the sound of the selected instrument by
pressing [PREVIEW].
To see which instruments can be selected here, refer to "Drum
Instrument List" (p. 180).
Channel 10 Priority (p. 154)
This setting is necessary when both drum kit part and
percussion part are simultaneously assigned to Channel
10. This setting selects which instrument has "priority"
in being played when the same note number is assigned
to both a pad and an instrument in the percussion set.
When data is imported to the TD-8 from an external
sequencer (p. 112), the part selected here is recorded.
Making the Settings for Each
Instrument
Set the volume, Ambience level, pan, pitch, and decay for
each instrument.
• When a Preset percussion set is selected, only the Instrument
List is displayed. If changing any instrument, first copy the set
to a User percussion set (p. 104). You can then make the
change by selecting a User percussion set.
• Making changes to a User percussion set that is being used in
a pattern may result in changes in the way the pattern is
played.
fig.06-021
] to move the cursor to the
105