Installing The Windows 2000 Serial Midi Driver; Connecting The Sk-500 And The Computer - Roland Sound Canvas SK-500 Owner's Manual

Installing the Windows 2000 Serial MIDI Driver

* Installation of this driver requires that an Administrator or other authorized user
log on to Windows. For more details, consult your computer system administrator.
Connect the SK-500 and the computer. You will need the items listed below,
so take a moment to remove them from the package before you begin.
• Computer Cable (Sold Separately)
• AC Adaptor
• SK-500 CD-ROM
* Please be sure to read the software license agreement included with the software
before opening the SK-500 CD-ROM package.

Connecting the SK-500 and the Computer

1
Make sure that power to the SK-500 and the computer is
turned off.
2
Connect the AC Adaptor to the SK-500.
3
Use a computer cable to connect the computer's serial port and
the SK-500.
4
Set the computer switch on the SK-500's rear panel to "PC."
5
Turn on the power to the SK-500 and start up the computer.
fig.pc-seri-e
Set the computer switch to "PC."
* The computer switch
settings go into effect the
next time the power is
turned on.
Confirm the connector type,
then fit the connectors together.
Computer
Always be sure to turn off the
power whenever connecting
another device or instrument,
or when changing the computer
switch setting.
Computer Cable
* Refer to the owner's manual
for your computer to confirm
To Serial Connector the location of the Serial
connector.
For a diagram of the pin
connections on the
computer cable's
connectors, refer to the SK-
500 data (in PDF format) on
the CD-ROM.
SK-500
AC Adaptor
39