Making Connections - Roland GR-30 Manual

Making Connections

After setting up the guitar end of the system, connect your equipment following the examples shown in the con-
nection diagram below.
Stereo set, radio-cassette player, etc.
To AUX, LINE IN
L
When plugging in Monaural Amps or Headphones,
turn on the power to the GR-30 while holding down
pedal 1 (Monaural Output).
Headphones
The (L/R) MIX OUT jacks can also be
used as dual stereo headphone jacks.
However, note that the left and right
output of the R (PHONES) jack are
reversed. Also be aware that you
cannot simultaneously use one jack as
a LINE OUT while using the other as a
headphone jack — that is, you can't use
a monaural plug and a stereo plug at
the same time.
To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn
off the power on all devices before making any connec-
tions.
To prevent the inadvertent disruption of power to your
unit (should the plug be pulled out accidentally), and to
avoid applying undue stress to the AC adaptor jack,
anchor the power cord using the cord hook, as shown in
the illustration.
Use only the specified expression pedal (EV-5; sold sepa-
rately). By connecting any other expression pedals, you
risk causing malfunction and/or damage to the unit.
12
Synthesizer amp
(keyboard amplifier, PA system, etc.)
R
L
PHONES
Guitar amp/
guitar effects processors
R
See p. 19
See
See p. 49
p. 13
AC Adaptor
Code Hook
<<fig. Cord Hook>>
Guitar with GK-2A/
other GR-compatible guitar
AC Adapter (included)
connect to AC power source
GR-30