How To Set Serial Midi Driver - Roland Sound Canvas SK-500 Owner's Manual

Installing Serial MIDI Driver In Windows 95/98
9
Check the setting in the "Computer Switch Setting" dialog and
click "Next."
fig.18_70
10
This completes installation of the driver. Select "Yes, I want to
restart my computer now." and click "OK" to restart the
computer.

How to Set Serial MIDI Driver

Using Serial MIDI Driver requires the correct settings for the computer
being used as well as the MIDI sound module connected to the computer.
First, use the following procedure to open the Roland Serial MIDI Driver
settings dialog.
1
Double-click on "Multimedia" in "Control Panel."
2
Click on "Devices."
3
Double-click on "MIDI Devices and Instruments," then click
on "Roland Serial MIDI Out A" which appears underneath
this.
4
Click on "Properties" at the lower right inside the dialog.
5
In the Roland Serial MIDI Out A Properties dialog, click on
[Settings]. The [Roland Serial MIDI Driver Setting] dialog
appears; continue by making the following settings.
26