Vax TBT3V1T1 Manual page 15

Cleaning the filters and separator
CAUTION: Always remove the reach wand/accessories from the handheld and empty the dirt container before
cleaning the filters and separator. DO NOT use the slim vac without both the filters in place.
For best cleaning results, the filters should be tapped over a bin every 4-6 uses to remove dirt and debris and
washed every 3 months depending on the level of use.
Cleaning the filter
Press the handheld
release clip. Pull and
remove the reach wand
or the accessory that is
attached to the handheld.
Pull the tab on the filter to remove from the cover.
Wash the filter under
running water (40°C max).
Taking care of your machine
Twist the filter cover
anticlockwise to unlock.
24hr 24hr
Leave for 24hrs or until
fully dry before replacing.
Pull and remove the filter
cover from the handheld.
Tap the filter over a bin to
remove any dirt/debris.