Vax TBT3V1T1 Manual page 13

Using the slim vac as a handheld
NOTE: The slim vac has a constantly rotating brushbar when activated. Never leave the slim vac in one spot for an
extended period of time as this may damage the floor surface. Always turn the brushbar off when cleaning hard
floors. The brushbar should be ON for carpets and OFF for hard floors. To prevent any damage being sustained
test on an inconspicuous area of the flooring. Always take extra care when using the slim vac on the stairs.
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
All of the accessories,
including the Powered
Head, can be attached
directly onto the handheld.
The reach wand, when
attached to the Powered
Head/accessory, is not
free standing. Place safely
and securely to one side.
To switch the slim vac
on, press the on/off
button located on the
back of the handle. The
battery level indicator
light on the handle and
battery charging light will
illuminate white.
Using your machine
Choose an accessory
(pictures illustrated
depending on model).
When the slim vac is switched on, the boost on/off
button will also illuminate, confirming that the boost
mode is 'On'. The slim vac will always start in boost
mode. Pressing the boost button will deactivate/activate
the boost mode.
To switch the brushbar on, press the brushbar on/off
button. The light on the Powered Head and the brushbar
on/off light will illuminate to indicate the brushbar is
on and the brushbar will constantly spin. To switch the
brushbar off press the brushbar button again.
The slim vac will always start with the brushbar off.
Push the chosen
accessory into the
handheld until it is
securely locked into place.
Boost mode increases
suction for particularly
dirty areas that require
additional cleaning.