Related Manuals for Vax Cordless Slim Vac Series
Summary of Contents for Vax Cordless Slim Vac Series
- Page 1 CORDLESS SlimVac CORDLESS SLIM VAC WITH DETACHABLE HANDHELD LET’S GET STARTED. TBTTV1B1 TBTTV1P1 TBTTV1P2 TBTTV1P3 TBTTV1T1 TBTTV1R1 VRS703...
-
Page 2: Let's Talk Safety
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • This vacuum cleaner does not stay upright without constant support, in between uses lie flat on the floor in a suitable location Basic so it does not become a trip hazard or can be stepped on. - Page 3 Children should not play with the vacuum cleaner. Cleaning and user maintenance should not be made by children without supervision. • Only Vax recommended tools and accessories should be used with this vacuum cleaner. • The battery must be removed from the appliance before it is scrapped.
- Page 4 Thank you for buying this Cordless Slim Vac. Taking care of your carpets and hard floors The Cordless Slim Vac series is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine.
-
Page 5: Table Of Contents
Contents Included with Let’s talk safety your machine Cordless Slim Vac Getting to know your machine 3-in-1 Tool Getting started Cordless Slim Vac Reach Using your machine 3-in-1 Tool Up Top Tool Taking care of your machine Cordless Slim Vac Pet Pet Tool/ 3-in-1 Tool Let’s talk technical... -
Page 6: Getting To Know Your Machine
Run time 24 minutes 3-in-1 tool 1-9-137854 Charge time 5 hours Weight 2.1 kg To purchase consumables and Dust bin capacity 0.6L accessories, please visit vax.co.uk Subject to technical change without notice. Turn off brushbar on hard floors. Images are illustrative only. -
Page 7: Getting Started
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. - Page 8 Getting started Fixing the wall bracket Fully assemble the Attach the wall bracket With the wall bracket Holding the wall bracket vacuum but do not to the handle. attached, stand the firmly in place, carefully attach the battery. vacuum close to the wall, remove the vacuum.
- Page 9 (60° C/140°F) or incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in a fire. Do not attempt to disassemble the battery or remove any component projecting from the battery terminals.
- Page 10 Getting started Charging the battery CAUTION: Do not use the vacuum cleaner when the machine is plugged in and charging. CAUTION: For best performance the terminals on the battery and vacuum cleaner must be clean and free from dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner. The On/Off and charging light will flash red whilst the charger is connected.
-
Page 11: Using Your Machine
Using your machine CAUTION: This vacuum cleaner has a constantly rotating brushbar when the brushbar ‘ON’ is selected. Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the floor surface. The brushbar should be ON for carpets and OFF for hard floors. If the brush bar has been obstructed, the motor protection sensor may have been activated, the light will flash Red and the brushbar will seize. - Page 12 Using your machine Using as a handheld vacuum cleaner Always take extra care when using the vacuum cleaner on the stairs. Press the handheld The reach wand when Choose an accessory Push the chosen release clip. Pull to attached to the Powered (pictures illustrated accessory into the separate the handheld...
- Page 13 Using your machine Using as a reach slim vacuum cleaner The reach wand can be used for hard to reach places. Press the Power Head/ Choose an accessory Push the chosen Squeeze the trigger accessory release clip (pictures illustrated accessory into the located underneath the and pull to remove the dependent upon model).
-
Page 14: Taking Care Of Your Machine
Taking care of your machine Removing the battery CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. Lie the handheld on Slide the battery out from its side on a flat stable the back of the handheld. surface. - Page 15 Taking care of your machine Cleaning the post-motor filter CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. For continuous best performance the filter requires cleaning every 3 months and should be replaced every 12 months depending upon use.
- Page 16 Taking care of your machine Cleaning the filter and separator Tap the mesh filter and separator over a bin to remove any dirt/ debris. Using a dry cloth wipe away any remaining dirt/debris. Refitting the separator, filter and dirt container CAUTION: Incorrect fitting of the separator and filter will reduce suction.
-
Page 17: Let's Talk Technical
Let’s talk technical IMPORTANT: If the brush bar has been obstructed, the motor protection sensor may have been activated, the light will flash Red and the brushbar will seize. Remove the Powered Head from the machine and clear any obstruction. Refit the Powered Head, switch on the vacuum cleaner by pressing the trigger and press the brushbar on/off button. - Page 18 Let’s talk technical Cleaning terminals Using a dry cloth or soft dusting brush remove any dust/debris from terminals on battery and inside the handheld.
-
Page 19: Accessories
Accessories Also available Slim Vac Tools Order at: www.vax.co.uk/spares-and-solutions Refer to ‘using your machine’ section for tool assembly instructions. Handheld mode tools 3-in-1 Tool 1-9-137854 The multi functional 3 in 1 tool is ideal for use all around the home without having to switch between tools. It’s perfect for those tricky corners and crevices, great for upholsteries such as;... - Page 20 Accessories Also available Slim Vac Tools Order at: www.vax.co.uk/spares-and-solutions Refer to ‘using your machine’ section for tool assembly instructions. Reach mode tools Up Top Tool 1-9-138099 This handy tool allows you to tackle those high, hard to reach areas. It’s perfect for reaching the top of curtains, cupboards and wardrobes.
-
Page 21: Notes
Notes... -
Page 22: What To Do If It Goes Wrong
What to do if it goes wrong Problem Solution • Check the contents panel on the box to make sure the part is included with your vacuum cleaner. Is there an accessory missing? • Check the battery is inserted correctly into the vacuum cleaner. •... -
Page 23: Getting In Touch
Getting in touch † †† Registration required. Terms and conditions apply, see vax.co.uk for details. 1 year guarantee on battery. - Page 24 Check with your Local Authority or retailer for recycling advice. © 2017 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge are the property of Techtronic Floor Care Technology Ltd and are registered in the EU and may be pending or registered in other countries.