Contents Contents Machine Overview General Safety Information Getting Started Maintenance Looking After Your Machine — Filters Looking After Your Machine — Removing Blockages FAQs Other Information Guarantee...
18 Stretch hose (some models only) Combination floor head (some models only) 20 Turbobrush (some models only) 21 Hard floor tool (some models only) NOTE: Some parts may vary according to model. Please check inside flap of box for more details. vax.co.uk vax.co.uk...
If the supply cord is damaged return the vacuum cleaner to a Vax authorised Service Agent or a suitably qualified person for examination, repair or adjustment. 11. Do not pull or carry this appliance by the cord. Do not use the cord as a handle, close a door on the cord or pull the cord around sharp edges or corners.
The TurboTool should first be attached to the supplied connector before fitting onto the hose handle. Operating the appliance and accessories NOTE: Fully unwind the power cord. A yellow mark on the cord indicates the recommended cord length. Do not exceed the cord length beyond the yellow mark. vax.co.uk...
Maintenance Packing away and storage NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where the floor head and tubes can be attached for storage and carrying. Emptying and cleaning the dirt container Cleaning the pre-motor filter 40 C max 24hr...
Looking after your machine – Filters Cleaning the shroud 24hr NOTE: The shroud is accessed by removing the dirt container lid and is located underneath the pre-motor filter. Cleaning the post-motor filter vax.co.uk...
Looking after your machine – Removing Blockages WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket. IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner.
What do I do if the unit/an accessory becomes damaged or broken? • We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk Why won’t the accessories pick up properly? •...
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
9:00 - 17:00 we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK...