Download Print this page

Rimage Amigo II Hardware Manual page 4

Replace a recorder
Hide thumbs Also See for Amigo II:

Advertisement

Replace a Recorder on a Rimage Producer II
4.
Connect the power cord to the Producer II.
5.
Connect the power cord to the power outlet.
Tip: If necessary, align the recorder(s). Refer to the Align a Recorder document available at
www.rimage.com/support.html
Align a recorder.
Update the Rimage Software
Important!
Install the appropriate service pack included with the recorder. This ensures that the new recorder
is supported by your Rimage system.
If no service pack software was included with the recorder, be sure you have the most recent service pack
already installed.
Service packs and instructions are available at www.rimage.com/support.html. Navigate: Product Family >
Support – Rimage product > Downloads tab.
Note: Installing the appropriate Service Pack ensures recorder/system compatibility. However, your system may
not operate at peak performance unless you have upgraded your Rimage control center or installed current
Rimage software.
Support information
Europe
Contact Rimage Services Europe:
www.rimage.com/support.html
Email:
support@rimage.de
Tel: +49-(0) 6074-8521-0
US, Asia/Pacific, Mexico/Latin America
Contact Rimage Services:
www.rimage.com/support.html
Email:
http://www.rimage.com/support_form.cfm
Tel: North America: 800-553-8312
Asia/Pacific, Mexico/ Latin America: 952-946-0004
112043_D
. Navigate: Producer Family > Support - product > Documents tab > Service >
When you contact Rimage Services, please provide:
Unit serial number and software version.
Functional and technical description of the problem.
Exact error message received.
Rimage Corporation reserves the right to make improvements to the
equipment and software described in this document at any time without
any prior notice. Rimage Corporation reserves the right to revise this
publication and to make changes from time to time in the content hereof
without obligation of Rimage Corporation to notify any person or
organization of such revisions or changes.
© 2008, Rimage Corporation
Autostar II™, Protégé II™ or Amigo II™
4

Advertisement

loading

This manual is also suitable for:

Autostar iiProtege iiProducer ii