Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rimage Manuals
  4. Printer
  5. Amigo II
  6. Setup and installation manual

Rimage Amigo II Setup And Installation Manual

Rimage amigo ii: installation guide
Hide thumbs Also See for Amigo II:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
Rimage Amigo II

Before you begin:

If you did not order a Rimage control center with
your Amigo II, obtain a PC that meets the PC
specifications listed in your Amigo II User Guide.
This document is intended for people who
are familiar with BIOS setup, hard drives,
partitioning, and Windows operating systems.
If you do not understand the procedures in this
document, ask your computer technician for help
or refer to your PC documentation.
1
Setup the PC.
Note: If you received a Rimage control center
with your Amigo II, you do not need to install a
FireWire® card in your PC.
a. Power down the PC.
b. If your PC does not have a FireWire
card, install the FireWire card
included with your Amigo II.
1

Setup and Installation

™
2
Prepare the Amigo II.
a. On the Amigo II, open the front door.
b. Cut the plastic tie wrap from the lift arm.
Caution! Do not cut the belt or cable!
c. Remove the tape from the mailbox feed
tray.
d. Remove the shipping foam inserted
above the carousel.
e. Close the front door.
tie wrap
tape
110655_H

Advertisement

loading

Related Manuals for Rimage Amigo II

Summary of Contents for Rimage Amigo II

  • Page 1: Setup And Installation

    Setup the PC.  Note: If you received a Rimage control center with your Amigo II, you do not need to install a FireWire® card in your PC. a. Power down the PC. b. If your PC does not have a FireWire card, install the FireWire card included with your Amigo II.
  • Page 2 Guide Printer Foam Top Cover Foam Inserts Printer Amigo II so that the plastic feet slide into the slots on the printer plate. Printer plate Slots for feet g. Place the printer on the Amigo II so that the plastic feet slide into the slots on the printer plate.
  • Page 3 Connect the cables (Everest). a. Connect the printer cable from the autoloader to the printer. b. Connect the short power cord from the autoloader to the printer. e. Connect the power cord from the autoloader to the power outlet. Connect the cables (Prism).

  • Page 4: Install The Printer Driver

    Advanced Setup Guide is located on the PC at Start > Programs > Rimage > Manuals. For information about operating and maintaining the Amigo II, refer to the Amigo II User Guide included with your product. For additional support and product information, go to www.rimage.com/support.html.