Download Print this page

Stamina 1130 Owner's Manual page 19

Magnetic rowing machine

Advertisement

STORAGE
1. To store the Stamina® 1130 Magnetic Rowing Machine, simply keep it in a clean dry place.
2. Move the Stamina® 1130 Magnetic Rowing Machine with the moving wheels on the Front Stabilizer
of the BASE FRAME(3). Lift the REAR STAND(2) to move the Stamina® 1130 Magnetic Rowing
Machine. Do not use the SEAT(21) to move the Stamina® 1130 Magnetic Rowing Machine. The
SEAT(21) will move and the SEAT CARRIAGE(10) may pinch your hand or fingers.
3. Refer to the illustration below. You can stand the Stamina® 1130 Magnetic Rowing Machine on end
for storage.
MAINTENANCE
The safety and integrity designed into the Stamina® 1130 Magnetic Rowing Machine can only be
maintained when the Stamina® 1130 Magnetic Rowing Machine is regularly examined for damage and
wear. Special attention should be given to the following:
1. Pull on the HANDLEBAR(15) and verify that the Magnetic System provides tension and the seat
travel is smooth and stable.
2. Clean the roller tracks in the RAIL(48) with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Check the condition of the STRAP(25). Replace the STRAP(25) if it is cracked or broken.
5. Verify that the CAUTION LABEL(109) is in place and easy to read. Call Stamina Products
immediately at 1-800-375-7520 for a replacement CAUTION LABEL(109) if it is missing or damaged.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components shall be replaced immediately or the Stamina® 1130 Magnetic Rowing
Machine removed from service until repair is made.
8. Only Stamina Products supplied components shall be used to maintain/repair the Stamina® 1130
Magnetic Rowing Machine.
9. Keep your Stamina® 1130 Magnetic Rowing Machine clean by wiping it off with an absorbent cloth after
use.
19

Advertisement

loading

This manual is also suitable for:

35-1130a