Advertisement
OPERATIONAL INSTRUCTIONS
To assemble the HEART RATE TRANSMITTER(103),
insert the BUTTON BATTERY(CR2032)(107) as shown
in the illustration. Place the BATTERY RUBBER
RING(105) on the edge of the opening and place
the BATTERY COVER(106) over the BUTTON
BATTERY(CR2032)(107). Using a coin or similar object,
press down on the BATTERY COVER(106) and turn
counterclockwise to securely close the cover.
NOTE:
1. Make sure to close the BATTERY COVER (106) very
tightly as illustrated to prevent sweat and moisture
from damaging the battery.
2. The HEART RATE TRANSMITTER(103) is latex free
and its material is appropriate for human contact.
Attach the ELASTIC STRAP(104) by inserting the heart-shaped tabs through the openings in the transmitter
and twisting. Adjust the ELASTIC STRAP(104) to fit your chest snugly as shown in the illustration below.
(104) Elastic Strap
Heart-Shaped Tab
To ensure a secure connection above, be sure that the front
edge of the heart-shaped tab is completely inside of the heart-
shaped opening on the HEART RATE TRANSMITTER(103).
NOTE: If your heart rate is inconsistent or not tracking on your workout monitor, do the following:
Moisten the
and make sure they are in contact with the skin. Your skin may be dry when you begin your
workout and the moisture is necessary to ensure contact. As you sweat, contact will improve.
Tighten the elastic strap so it remains in place as you exercise. Movement of the
electrodes will result in inaccurate or erratic signal and readings.
Clean the
and water and dry with a soft towel.
Transmitter Care and Maintenance
Wash regularly with mild soap and water solution and dry with a soft towel being careful not to scratch
the
heart rate
sensor electrodes.
Store in a cool, dry place. Make sure the
and never store a wet transmitter in non-breathable material like a plastic bag or sports bag.
Do not bend or stretch the transmitter.
NOTE: The frequency of the receiver built into the Stamina® 1130 Magnetic Rowing Machine is 5 kHz.
All compatible heart rate transmitters from other companies will work with the Stamina® 1130
Magnetic Rowing Machine.
(103) Heart Rate Transmitter
sensor electrodes on the back of the HEART RATE TRANSMITTER(103)
heart rate
heart rate
sensor electrodes as dirt can interfere with transmission. Use a mild soap
(104) Elastic Strap
heart rate
sensor electrodes aren't stored with any wet material
12
close
open
(106) Battery Cover
(105) Battery Rubber Ring
(107) Button Battery
(103) Heart Rate Transmitter
Heart Rate
Sensor Electrode
heart rate
sensor
Advertisement
