Host Interface; Network Setup - Ricoh AP2610 Setup Manual

Configuring the Printer for the Network
A A A A
Press { { { { Menu} } } } .
On Line
Job Reset
Form Feed
Power
3
"Menu" appears on the panel dis-
play.
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Host
Interface" menu.
Menu:

Host Interface

C C C C
Press { { { { Enter #} } } } .
On Line
Job Reset
Form Feed
Power
The following message appears on
the panel display.
Host Interface:
I/O Buffer
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Net-
work Setup".
Host Interface:

Network Setup

42
Menu
Escape
Enter
Error Data In
ZFDP020N
Menu
Escape
Enter
Error Data In
ZFDP060N
E E E E
Press { { { { Enter #} } } } .
The following message appears on
the panel display.
Network Setup:
IP Address
F F F F
Select the protocol you want to
use.
Note
❒ Do not select protocols that are
not used on your network.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Active Protocol".
Network Setup:
Active Protocol
B Press { { { { Enter #} } } } .
The current setting appears on
the panel display.
Active Protocol:
TCP/IP
C Press { { { { Enter #} } } } .
D Press { { { { U U U U } } } } or { { { { T T T T } } } } to select "Ac-
tive" or "Not Active", and then
press { { { { Enter #} } } } .
E Set other protocols you need to
set in the same way.
Note
❒ Leave unused protocols "Not
Active".