Ricoh AP2610 Setup Manual page 47

G G G G
Attach the interface cable to the
printer.
H H H H
Plug the printer's power cord
back into the wall outlet, and then
turn on the power switch.
Note
❒ After installing the last option that
you want, print the configuration
page to confirm the installation. If
the new device is listed in the col-
umn of configuration options, then
it has been properly installed. For
more information about printing
the configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-ROM
labeled "Operating Instructions".
❒ If the printing position is not cor-
rect, adjust the registration of the
trays. For more information about
adjusting the registration of the
trays, see "Adjusting the Registra-
tion of the Trays" in the Printer
Reference.
AD410 (Duplex Unit)
35
2