Raymarine SmartPilot ST6001 Commissioning Manual page 42

32
1. Access the AUTOLEARN screen in Seatrial Calibration:
i. from Standby mode, press standby for 2 seconds, then disp twice to
ii. then press auto to enter Seatrial Calibration, and disp 4 times until you
Enter Seatrial calibration
Prepare for AutoLearn
• steer straight ahead at cruising speed
(planing boats – just on the plane)
• head into wind and waves
2. Prepare to start the AutoLearn:
• power boats: steer straight ahead (rudder centered). For non-planing
see the SEATRIAL CAL screen
see the AUTOLEARN page
2 sec
x4
CHECK!
Before proceeding, ensure
you have sufficient clear
sea space
boats, set a comfortable cruising speed. For planing boats set the speed so
the boat is just planing
SmartPilot Series Commissioning Guide
1 minute
(approximately)
x2
or
AutoLearn in progress
Start
AutoLearn
D5495-2
D8641-1