Naming, Erasing And Showing A Track - Raymarine HSB Chartplotter User Manual

70

Naming, Erasing and Showing a Track

To name an existing track, erase a track or show a track, you select the
track from the track list, then press the appropriate soft key as follows:
1. Press the TRACK LIST soft key. The Track List is displayed. The
TRACK
LIST
grey selection bar indicates the selected track.
Select the required track then press the appropriate soft key.
2. If you NAME a track, use the trackpad to move the cursor right or left
NAME
TRACK
to the character you wish to edit. Then use the top or bottom of the
trackpad to edit the letter or number. Press ENTER finish the
operation.
3. If you ERASE a track you are prompted to confirm.
ERASE
TRACK
Press NO to cancel the operation, then ENTER if you wish to
remove the track list.
Press YES to erase the track from the list, then ENTER to remove
the track list.
4. If you SHOW a track, and you have a current track on screen, you
SHOW
TRACK
are prompted to save the track. Proceed as previously described in
Clearing the Current Track.
Alternatively, press the NO soft key to cancel the SHOW TRACK
operation.
The track list is removed and the selected track is displayed.
HSB Series Chartplotter