Erasing A Track; Track Interval - Raymarine E90W User Reference Handbook

Note: If the power fails whilst a track is being recorded or the
position fix is lost, a break will occur in the track. Only the last
segment of a track can be converted into a route.
Note: If the maximum number of tracking points is reached, you
will be warned. The track will continue to be recorded with the
earlier tracking points being overwritten.

Erasing a track

In the chart application:
1. Select the PLANNING softkey.
2. Select the MY TRACKS softkey.
3. Highlight the required track from the list.
4. Select the ERASE TRACK softkey.
5. Select the YES softkey to confirm the action, or NO to cancel.
Note: You can also erase all tracks at once, using the DATA >
ARCHIVE AND TRANSFER function.
Reviewing and editing a track
You can review and edit aspects of the tracks stored.
You can:
• Erase a track.
• Create a route from a track.
• Show or hide a track on the chart (only available from the chart
application).
• Change the name of a track.
• Change the color of a track.
• Erase a track.
66
Selecting a track to review or edit
1. Do one of the following to select the required track:
• With the chart application active, select a track on screen.
• With the chart application active, use the following softkey
sequence, Navigation options > Planning > My Tracks.
• From the home screen, select My tracks.
You can then proceed and review or edit the required track using
the options available.

Track interval

The track interval specifies the time period or distance between
the points in a track.
You can adjust the interval between points which can help ensure
best use of the available storage.
The settings are available from the Chart Setup Menu:
• Record Vessel Track By — specifies the interval type (Auto /
Time / Distance).
• Track Interval — specifies the interval value (for example, 15
minutes).
For example when creating a track for a long journey, an interval
set to Auto could result in rapid use of all of the storage available
for track points. In this case selecting a higher value for the Track
Interval would provide capacity for a longer track.
Setting the track interval
In the chart application:
1. Press the MENU button.
2. Select Chart Setup.
3. Select the Record Vessel Track By option and set to the
appropriate value:
E-Series Widescreen User reference