Table of Contents
Advertisement
Chapter 3: Waypoints, Routes and Tracks
Saving the Current Route
You can save up to 20 named routes in the route database list. These
routes can then be re-displayed and followed at a later date.
Note: If the current route has not been saved, when you attempt an
operation that affects this route, e.g. CLEAR ROUTE, you are prompted
to save it.
To save and name the current route:
1. To access the SAVE ROUTE soft key, press the ROUTE soft key,
followed by MORE.
2. Press the SAVE ROUTE soft key. The Route List pop-up and the
SAVE
ROUTE
NAME ROUTE soft keys are displayed.
3. The next available entry on the route list is highlighted.
(If required, you can use the trackpad to select another position in the
list; this can be a blank slot, or an existing route that you no longer
require).
4. If you do not wish to name or re-name the route, press the NO soft
key (or ENTER) to clear the list. The route is saved and is listed as
Route Not Named.
SAVE ROUTE
1
EMPTY
2
EMPTY
3
EMPTY
4
EMPTY
5
EMPTY
NAME ROUTE?
YES
NO
D4155-1
53
Advertisement
Table of Contents
