Table of Contents
Advertisement
Chapter 6: Installation
Chapter 6: Installation
6.1 Introduction
This chapter provides instructions to assist you in planning the
installation of the HSB Series Chartplotter aboard your vessel, whether
you are installing a simple system such as that shown below, or an
integrated system such as those shown in Section 6.5 Integrated
Systems.
Note: This chapter provides information on installing an HSB Series
display unit. You can refer to this chapter when installing any HSB
display unit such as a repeater or combined radar/chartplotter display. If
you are installing a combined radar/chartplotter system, refer to the
scanner installation details provided in the Pathfinder HSB Series Radar
Handbook .
Compass
Note: If you wish to practice using the radar display before installation,
you can set it up by connecting a 12V or 24V DC power supply
(connecting the red core from the power lead via a 6.3A quick blow fuse
to positive and the black core to negative) and using the simulator mode,
as described in Chapter 2 Getting Started .
HSB Series Display
Distribution Panel
NMEA
12/24V Supply
12V Supply
GPS
Junction
Box
SeaTalk
12V Supply
93
D4288-1
Advertisement
Table of Contents
