Table of Contents
Advertisement
4.
Remove the board (4) from the computer.
To install the top-cover camera board, reverse this procedure.
Solid-state drive
To remove the solid-state drive, use this procedure and illustration.
Table 5-7
Solid-state drive descriptions and part numbers
Description
2 TB, 2280, PCIe-4×4, ZTurbo, TLC
1 TB, 2280, PCIe-4×4, TLC
512 GB, 2280, PCIe-4×4, TLC
256 GB, 2280, PCIe-4×4
128 GB, 2230, PCIe
Solid-state drive thermal pad
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the solid-state drive:
1.
Use the pull tab (1) to remove the solid-state drive shield (2).
The solid-state drive shield is included in the Bracket Kit, spare part number M03436-001.
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
35).
34).
Spare part number
M52027-001
M16560-001
M17436-001
N04489-001
M11040-001
N39891-001
34).
Advertisement
Table of Contents
