Asko TD85.C18X User Manual page 40

Failure display
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Errors indicated on the display unit (depending on the model) may include the following:
Problem/error Error indication on the display
E0 Control unit failure.
E1 Thermistor error.
E2 Communication error.
E6 Relay failure.
E7 Door failure.
E8 Button failure.
E9 PB/UI software versions are not com-
patible.
E10 EADBS communication error.
E11 Motor communication error.
INFORMATION before, during, and after the program
(depending on the model)
Error indication on the display
EN: Please close the door before pressing start.
EN: Option not available at this phase of cycle.
EN: Cycle was interrupted by power failure.
Please resume.
EN: Clean door filter.
EN: Child lock is on. Press buttons for 3 sec to
unlock.
40
Press and hold the INFO button to display the
error description.
Switch off the dryer and turn it back on.
What to do?
Control unit failure.
Call service centre.
Temperature sensor failure.
Call service centre.
Communication error.
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Call service centre.
Call service centre.
Call service centre.
What to do?
Close the dryer door before starting or resuming
the program.
This option is not available. Select an option that
is still available.
Press the Start/Pause button to restart or resume
the program.
See chapter "CLEANING AND MAINTENANCE".
See chapter "SETTINGS".