Asko TD85.C18X User Manual page 21

Evacuation of humid air
Use the supplied air exhaust hose to convey the humid air from the dryer is through an opening
(ventilation system, window etc.).
Connecting the air exhaust hose to the dryer
The dryer allows three possibilities for air evacuation: on the rear, on the right, and on the left side.
Upon delivery, the opening on the back is open and a connection fitting is installed on it (1).
Installation:
Fitting the air exhaust hose to another opening:
Side openings are covered with two
caps. The machine comes supplied
with an air exhaust hose (3) and two
clamps (2).
Slip the exhaust hose (3) over the con-
nection fitting (1) and fasten it with a
clamp (2).
Instead of on the rear opening, the air
exhaust hose can be fitted on one of
the side openings.
• Move the connection fitting from the
rear opening (1) to the side opening.
Then, connect the air exhaust hose and
secure it with a clamp (2).
Use a cap to close the opening on the
back of the dryer.
21