Advertisement

Quick Links

User Manual
Tumble dryer
TD85.C18X
PEL D80 EE
WARNING! Carefully read the instructions for use before using the dryer.

Advertisement

Table of Contents
loading

Summary of Contents for Asko TD85.C18X

  • Page 1 User Manual Tumble dryer TD85.C18X PEL D80 EE WARNING! Carefully read the instructions for use before using the dryer.
  • Page 2: Table Of Contents

    Contents Introduction ..........................Safety precautions ....................................................Dryer description ...................................................... Before using the appliance for the first time ............................................Installation and connection ..................................................Advices before drying ....................................................Drying process, step by step ................................................... Settings ........................................................
  • Page 3: Introduction

    Introduction Dear Customer, we thank you for purchasing this quality product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe.
  • Page 4: Safety Precautions

    Safety precautions General Please read the instruction manual and save it for future reference. • Please do not use the tumble dryer if you have not read and understood these instructions or use first. • Failure to observe the instructions for use or inappropriate use of the tumble dryer may result in damage to the laundry or appliance, or injury to the user.
  • Page 5 • At least two persons are required to install the tumble dryer on top of a washing machine. • The dryer shall not be connected to the power mains using an extension cord. • Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or hair dryer.
  • Page 6 • Air in the dryer environment should not contain dust particles. The air where the dryer is installed should be thoroughly ventilated to prevent reverse flow of gases released from the gas appliances with open fire (e.g. fireplaces). • Do not evacuate the air from the dryer through channels used for appliances or devices that use natural gas or other fuels for their operation (only applies to the evacuation dryer).
  • Page 7 • Do not place the dryer on a carpet with long fibres as this may impede air circulation. • The air in the room where the dryer is installed may not contain dust particles. • Make sure the fibres do not accumulate around the dryer. •...
  • Page 8 • If you wish to move the dryer or store it in a non-heated room during winter, it is essential that you first empty the condensed water tank (only applies to the condenser dryers and dryers with a heat pump). •...
  • Page 9 • If the net filter is clogged, the automatic heater switch-off device can be triggered. See chapter "CLEANING AND MAINTENANCE" (only applies to evacuation and condenser dryer). • HOT SURFACE! WARNING! The back of the dryer may get very hot during operation.
  • Page 10 • Do not let children younger than three years to come near the dryer, unless they are under constant supervision. • The dryer is made in compliance with all relevant safety standards. This dryer may be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, but only if they are supervised during the use of the...
  • Page 11: Dryer Description

    Dryer description 1. Main switch (ON/OFF) 2. Program selector knob 3. Display 4. Program selector buttons 5. Button (start/pause) 6. Rating plate with information about the dryer (on the inside of the drying machine door) 7. QR and AUID code (on the inside of the dry- ing machine door) 8.
  • Page 12: Before Using The Appliance For The First Time

    Before using the appliance for the first time Packaging Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "Disposal"). Cleaning Disconnect the dryer from the power mains and open the door towards you. Before using the dryer for the first time, clean the dryer drum using a soft damp cotton cloth and water.
  • Page 13: Installation And Connection

    Installation and connection Dryer placement The dryer can be either free standing or installed on top of a washing machine. INFORMATION! At least two persons are required to install the tumble dryer on top of a washing machine. The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may be longer due to limited amount of ambient air.
  • Page 14 Free-standing appliance The dryer may be placed adjacent to a washing machine. If the friction between the dryer feet and the floor is not sufficient, the dryer may move during oper- ation. To prevent sliding, use a non-slide mat or install the supplied vacuum feet onto both front feet.
  • Page 15 Opening the dryer door (top view) Stacking on top of a washing machine To stack the dryer on top of a washing machine, use the extra vacuum feet and the tipping guard (A+B), supplied in the cardboard box in the dryer drum. Tipping guard part B is designed to fit on washing machines and it may be hard or impossible to mount on appliances of other brands.
  • Page 16 INFORMATION! Washing machine on which you wish to install the dryer must be able to bear the weight of the dryer (see washing machine’s rating plate or technical information).
  • Page 17 How to stack a dryer onto the washing machine: There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard. The tipping guard consists of two metal parts (A + B). Use two screws to attach the A part to the back of the dryer.
  • Page 18 Table continued from last page Set the dryer feet: 1. Tighten the front two feet all the way in. 2. Undo the back feet by 3.5 turns or 5 mm; then, fasten the jam nuts towards the bottom of the appli- ance Place the dryer onto the washing ma- chine:...
  • Page 19 Changing the door opening direction To change the direction of door opening, proceed as follows: Open the door fully. Undo the screws and remove the door. Use a screwdriver to remove the door lock cover and undo the screw on the door lock.
  • Page 20 Undo the door hinge assembly (left) and the door latch assembly (right), switch their positions, and replace the screws (door hinge assembly to the right-hand side, door latch assembly to the left-hand side). INFORMATION! Use a screwdriver to remove the plastic part more easily.
  • Page 21 Evacuation of humid air Use the supplied air exhaust hose to convey the humid air from the dryer is through an opening (ventilation system, window etc.). Connecting the air exhaust hose to the dryer The dryer allows three possibilities for air evacuation: on the rear, on the right, and on the left side. Upon delivery, the opening on the back is open and a connection fitting is installed on it (1).
  • Page 22 Connecting the air exhaust hose to a ventilation duct The air exhaust hose should be routed in shortest and straightest possible way to the ventilation system opening (air evacuation duct). Use a clamp to attach the air exhaust hose to the ventilation opening.
  • Page 23 Extra equipment If the air exhaust hose is connected to an opening in the wall, influx of cool air may be prevented by installing a ventilation grille. If there is only one ventilation opening in the room, an air lock should be installed. This extra equipment can be purchased from your seller.
  • Page 24 Connecting to the power mains ELECTRIC SHOCK! After installation, the dryer should stand still for two hours before it is connected to the power mains. Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely accessible.
  • Page 25: Advices Before Drying

    Advices before drying This chapter includes several advices on how to prepare the laundry from drying. Laundry sorting Sort the laundry according to: • type, • fabric thickness. For the most even drying, make sure the laundry is made of a similar material. Clothing 1.
  • Page 26 Table continued from last page Bleaching Bleaching in cool water Bleaching not allowed Dry cleaning Dry cleaning with all agents Perchloroethylene R11, R113, petroleum Dry cleaning in kerosene, pure alcohol, and R113 Dry cleaning not allowed Ironing Ironing with a hot iron with a maximum temperature of 200 °C Ironing with a hot iron with a maximum temperature of 150°C Ironing with a warm iron with a maximum temperature of 110°C Ironing not allowed...
  • Page 27 • clothing that was chemically cleaned (or dry-cleaned) at home, • foam, • glass fibres.
  • Page 28: Drying Process, Step By Step

    Drying process, step by step STEP 1: Sort the fabrics See chapter "Advices before drying" STEP 2: Turn on the main switch. Turning on Press the on/off button. Switching off Press the on/off button. STEP 3: Open the dryer door and insert the laundry. Open the dryer door towards you.
  • Page 29 STEP 4: Choose the drying program. Choose the program by rotating the program selector knob in either direction. Confirm the program selection by pressing the button under the program. Select the program based on the type and remaining moisture of the laundry you wish to dry. Anticipated program duration is indicated on the display.
  • Page 30 Table continued from last page Programe (factory de- M a x . Description fault program) TIME 60 min Cycle will stop when set time is reached. The time program is suitable for small loads. TIME 40 min Cycle will stop when set time is reached. The time program is suitable for small loads.
  • Page 31 STEP 6: Close the door and start the drying process. Close the dryer door and press the Start/Pause button. Start (pressed briefly start/resume) Pause (short press of the button - pause) Stop (press and hold for 3 seconds stop or cancel) Remaining time Depending on the selected program and load, anticipated drying time will be displayed in hours and minutes.
  • Page 32 STEP 7: End of program After the end of the drying program, the display will indicate that the drying has been finished. If you have selected the "anti-crease" option, the dryer will continue to operate after the end of the drying cycle.
  • Page 33: Settings

    Settings Only appliance owner/distributor may change the settings! (owner/distributor should check Service manual) On display Setting Description Cleaning the filter On/Off Cleaning the door filter in the 1 --> 10 door Cleaning of water condenser 10 --> 100 (step 10) Condensed water Drain/Tank Payment system...
  • Page 34 Table continued from last page On display Setting Description Temporary language selec- On/Off (from 0 to 5) tion You can select up to 5 lan- guages, which will be available in the main menu. Sound setting 0 --> 5 Display settings: 1 -->...
  • Page 35: Cleaning And Maintenance

    Cleaning and maintenance INFORMATION! Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug the power cord from the outlet). Cleaning the door net filter in the door Before cleaning, make sure to switch off the appliance and disconnect it from the power mains (unplug the power cord from the outlet).
  • Page 36 Table continued from last page If it is necessary to clean the net filter from the back, unscrew the screw and turn the filter from the locked to the unlocked position. Pull out the entire filter unit and clean it thoroughly, and return the filter unit to its original position after cleaning.
  • Page 37 INFORMATION! Always disconnect the dryer from the power mains before cleaning. In the case of a 3 phase connection of the appliance, switch off the main socket switch.
  • Page 38: Errors What To Do

    Errors what to do? Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying program.
  • Page 39 Table continued from last page Problem/error Cause What to do? Laundry not • Filters are not clean. • Clean the filters (see chapter "CLEAN- dried or dry- ING AND MAINTENANCE"). ing takes too long. • Dryer is placed in a closed room; •...
  • Page 40 Failure display In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Press and hold the INFO button to display the error description. Switch off the dryer and turn it back on. Errors indicated on the display unit (depending on the model) may include the following: Problem/error Error indication on the display...
  • Page 41: Service

    Service Before calling a service technician See the chapters "Troubleshooting and "Cleaning and maintenance" and see if you can resolve the problem yourself. When you contact a service centre, please state the model (1), type (2), and serial number (3) of your dryer.
  • Page 42: Technical Information

    Technical information Technical information Height 850 mm Width 595 mm Depth 769 mm Weight (net) 43 kg Drum volume 145 l Maximum drying load See rating plate Rated power See rating plate Drum material Stainless steel Housing material Hot-dip galvanized and powder coated sheet metal, or stainless steel sheet.
  • Page 43: Program Chart

    Program chart The table indicates the power consumption and time values for drying of a test batch of laundry with various loads and after spinning at various rates, consistently with the EN61121. The following requirements apply to the consumption values specified below. Inlet air temperature room temperature Inlet air humidity...
  • Page 44 * Due to deviations in terms of type and amount of laundry, spinning, power supply oscillation, and environment temperature and humidity, the values measured at the user may differ from the one stated in the table.
  • Page 45: Disposal

    Disposal Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste.
  • Page 46: Quick Guide

    Quick guide Sort the fabrics Sort the fabric by type and by how heavily soiled the laundry is. Observe the drying symbols on the laundry labels. Close the zippers, hook-and-loop fasteners and buttons. Switch on the main ON/OFF switch Open the dryer door and insert the laundry. Before doing so, make sure the drum is empty.
  • Page 47 855480-a7 We reserve the right to make changes.

This manual is also suitable for:

Pel d80 ee

Table of Contents