Asko TD85.C18X User Manual page 24

Connecting to the power mains
ELECTRIC SHOCK!
After installation, the dryer should stand still for two hours before it is connected to the power
mains.
Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely
accessible. The outlet should be fitted with an earth contact (in compliance with the relevant regulations).
If you have a tumble dryer with a 3 phase connection, the connection must be carried out by a qualified
and authorized specialist.
Connection upon delivery
Information about your dryer is indicated on the rating (type) plate.
Use the type A differential current protection switch.
WARNING!
The dryer shall not be connected to the power mains using an extension cord.
INFORMATION!
Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or hair
dryer.
INFORMATION!
Any repair and maintenance pertaining to safety or performance should be done by trained
experts.
24