Table of Contents
Advertisement
Table continued from last page
18
5
Set the dryer feet:
1. Tighten the front two feet all the
way in.
2. Undo the back feet by 3.5 turns or
5 mm; then, fasten the jam nuts
towards the bottom of the appli-
ance
.
6
Place the dryer onto the washing ma-
chine:
1. Lift the front part of the dryer by 5
to 10 cm.
2. Attach the vacuum feet onto the
front feet of the dryer.
3. Push the dryer into the tipping
guard (so that the B part is inserted
into the A part) and release it (See
figure on previous page).
INFORMATION!
Make sure the tipping guard is
"locked"!
Advertisement
Table of Contents
