3. Place the right display hinge and replace the 3 screws to secure the hinge to the system.
4. Install the:
a.
display assembly
b.
WLAN card
c.
base cover
5. Follow the procedure in
Keyboard lattice and Keyboard
Removing the keyboard
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
system fan
d.
heat sink
e.
solid state drive(SSD)
f.
WLAN card
g.
Input output(I/O) board
h.
power button
i.
hard drive
j.
system board
k.
display assembly
3. To remove the keyboard:
a. Remove the M1.2 x 2 (33) screws that secures the keyboard to the system [1].
b. Disconnect the keyboard cable from the connector in the system [2].
c. Lift the keyboard bracket away from the system.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
39