Installing The Wlan Card; Memory Module; Removing The Memory Module - Dell Vostro 5471 Owner's Manual

b. Remove the tab that secures the WLAN cables [2].
c. Disconnect the WLAN antenna cables from the WLAN card [3].
d. Lift the WLAN card away from the connector [4].

Installing the WLAN card

1. Insert the WLAN card into the slot on the system.
2. Connect the WLAN cables to the connectors on the WLAN Card.
3. Place the bracket and replace the M2.0 x 4 screw to secure it to the system.
4. Install the base cover.
5. Follow the procedure in

Memory module

Removing the memory module

1. Follow the procedure in
2. Remove the base cover.
3. To remove the memory module:
a. Peel the adhesive tape to a 90 degree angle above the memory module [1].
b. Using your finger tips gently pry the retention clips away from the memory module until the memory module pops up [2].
c. Slide and remove the memory module from the memory module slot on the system board [3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 19